Garage floor concrete in Torrance CA - a slab built to wear well and stay level

Cracked, chipped or uneven garage slab? We pour a new floor on a packed base, with the joints and curing planned so it wears well.

Request an estimate (424) 318-3115

Three white chaise lounges sit on a tan and gray paver patio inside a screened outdoor area.

What does it take to replace a garage floor in Torrance?

Garage floor concrete in Torrance means pouring a new garage slab, or replacing a tired one, on a solid base. You end up with a floor that sits level, sends water out the door and holds up to cars, tools and storage.

Most of our calls start with a floor that's cracked across the middle, sunk near the door or holding a puddle after every rain, and that usually goes back to the dirt underneath, not the concrete on top. Form & Finish Torrance Concrete Company is based in Torrance and works across the cities around it. The price of your floor mostly comes down to its size in square feet, whether the old slab has to be broken out and hauled away, how much base work the ground needs and whether a coating is going on later. The schedule turns on checking what your address needs before we book anything, the weather on pour day and the time the slab needs to cure before you park on it. You get your own figure from the estimate, once I've seen the garage.

How we pour garage floor concrete

Before anyone picks up a shovel, we talk through what you can expect from the floor and what's going on top of it, because those answers shape the plan. Then we break out the old slab and dig down to the subgrade, the soil the floor sits on, and pack it and the gravel base in layers, since a base that's only raked level settles with the dirt and takes the slab down with it. We check where the water runs so the floor falls toward the door and not back toward the house. Where the job calls for it, we set rebar, the steel that holds the slab together if it cracks. We pour early in the day so midday heat doesn't leave a weak, dusty top. Once the surface is finished, we cut control joints while the concrete is still young. Those are shallow grooves that give the slab a straight place to crack instead of a random one. Then we keep the slab damp while it cures. If the budget has to give somewhere, I'd rather cut back on the finish than the base, because you can redo a surface, but nobody fixes a sunk floor without tearing it out.

Garage jobs often run into the work around them. If you'd like the floor, the apron or the walk to the side door to look like more than plain gray, our decorative concrete work covers color and finish options. If the garage is cut into a slope and the dirt behind a wall is leaning in, a concrete retaining wall may need to go in before the floor does, so the new slab isn't fighting the hill.

Broom finish for grip

A broom finish is a light texture dragged across the wet concrete so tires and shoes grip when the floor gets wet. It suits a garage that sees rain tracked in, gets hosed down now and then or slopes noticeably near the door.

Smooth troweled finish for a cleaner floor

A smooth troweled floor is easier to sweep and roll a creeper across, so it suits a workshop, a home gym or a storage space that stays dry. It can get slick when wet, so we talk through how you'll use the garage before you choose.

Why Torrance homeowners call Form & Finish Torrance Concrete Company for garage floor concrete

I write the estimate and pour with the crew

I come out to look at your garage and write the estimate myself, and I'm on the job with our crew when we dig, pour and finish. The person who explained how the base and joints would go is the one making sure they go that way.

Years running crews, our own company since 2023

I spent years as another contractor's right hand, running the crew and sorting out the jobs that didn't go by the book, and then I started our company in 2023. That's why we tend to get the awkward ones, like tight access and cuts through old slabs.

Licensed and fully insured on every garage job

We're licensed and fully insured, and I'm happy to go over that at the estimate so you can check it before you sign anything. When you're ready, call (424) 318-3115 or send the form with your garage's square feet and any coating plans.

Get a free on-site estimate for your new garage floor

Call (424) 318-3115 or send the form with your garage's rough square feet and whether epoxy or a storage system is coming, and we'll reply within one business day. I'll come out, look at the slab and the ground around it and write you an estimate, free and with no obligation.

Phone: (424) 318-3115
Email: info@torranceconcretecompany.com
Location: Torrance, CA 90503
Hours: Mon–Fri: 7 AM–11 PM, Sat–Sun: 6 AM–10 PM

Garage floor concrete in Torrance, from permits to washout

Before we schedule anything, we check with the city or county office for your address on what a garage slab there needs, and if a permit is called for, we handle the paperwork with you. We do the same on jobs in Redondo Beach and Lomita, where we run into the same kind of older detached garages with tight driveway access that we see all over Torrance.

Storm drains in Torrance run straight to the ocean, so anything that washes into the gutter on pour day can end up in local waterways. A California stormwater handbook says concrete trucks should wash out in a designated spot, never in the street, a storm drain or on bare ground. On our jobs, the truck washes out in a proper spot, not in the street, and you're welcome to ask where before the pour. Wet concrete and its washwater can irritate skin and hurt eyes, so it helps to keep kids and pets inside while we work.

Questions Torrance homeowners ask about garage floors

How much does a new garage floor cost in the Torrance area?

A garage floor slab in the Los Angeles area usually costs about $8 to $15 per square foot, and that's the going rate in the market, not our price. Where yours lands depends on tear-out, base work, access and whether a vapor barrier goes in. When you compare bids, make sure each one lists the same square feet, slab thickness and plan for what goes underneath, so the prices describe the same job.

What causes cracks in a new garage floor, and will mine crack?

Probably a little, because even a well-designed, well-built garage floor isn't realistically free of cracks and curling, which is when the slab edges lift. It's worth asking up front what's normal so a few lines don't come as a surprise. We go over that with you before we pour, along with where the control joints will steer those cracks.

What is the best way to plan for an epoxy coating on a new garage floor?

Tell your contractor before the pour, because a floor that's getting epoxy, a storage system or a finished surface often needs moisture planning. A vapor barrier, a sheet that blocks ground moisture, gives a coating the most protection when it sits right against the slab, so each quote should say whether one is included. We ask about coatings at the estimate for that reason.

How do I make sure a new garage slab cures properly?

Ask for the curing plan before the pour. Curing means keeping fresh concrete moist and at a good temperature long enough to harden, and it shapes how strong the floor gets, how it wears and how much it cracks early on. Hot, dry, windy weather dries fresh concrete faster, mostly in summer but at any time of year, and a windy, sunny day needs more care than a calm, humid one at the same temperature. We plan the pour and the cure around the forecast.

Can someone without a license pour my garage floor in California?

Usually not. The state licensing board lets someone work without a license only on small jobs up to $1,000, up from $500. That exemption applies only when the work needs no permit and the person has no employees on the job. Forming, pouring and finishing flat concrete falls under the board's concrete contractor class.